Discussion:
lspci errors
Andreas Färber
2012-04-22 15:40:57 UTC
Permalink
Hi,

I'm seeing the following errors from lspci:

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0

pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0

pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8

My box has an IBM GXT6500P DVI graphics card plugged into PCI-X.
After removing that card physically, I got an additional error:

pcilib: sysfs_fill_slots: Couldn't parse entry address 0000:00

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0

pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0

pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8

The stdout output is identical between both, according to diff(1):

0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275
(rev 01)
0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID
600/500/400/Sapphire support Device (rev 04)
0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:cc:01.0 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.1 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04)
0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)
0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)

Is this a bug in pcilib? A hardware defect? How to verify?

Thanks,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe, e-mail: opensuse-ppc+***@opensuse.org
To contact the owner, e-mail: opensuse-ppc+***@opensuse.org
Andreas Färber
2012-11-27 23:28:32 UTC
Permalink
Post by Andreas Färber
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8
My box has an IBM GXT6500P DVI graphics card plugged into PCI-X.
pcilib: sysfs_fill_slots: Couldn't parse entry address 0000:00
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8
pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8
0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275
(rev 01)
0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID
600/500/400/Sapphire support Device (rev 04)
0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:cc:01.0 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.1 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04)
0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)
0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)
Is this a bug in pcilib? A hardware defect? How to verify?
After cross-grading from Factory ppc to 12.2 ppc64, I finally see my
graphics card but still some warnings:

linux:~ # lspci
pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c0

pcilib: sysfs_fill_slots: Couldn't parse entry address 0002:c8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:d8

pcilib: sysfs_fill_slots: Couldn't parse entry address 0001:c0

0000:00:01.0 VGA compatible controller: IBM GXT6500P Graphics Adapter
(rev 04)
0001:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:00:02.6 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0001:cc:01.0 Mass storage controller: Promise Technology, Inc. 20275
(rev 01)
0001:d0:01.0 SCSI storage controller: Mylex Corporation AcceleRAID
600/500/400/Sapphire support Device (rev 04)
0002:00:02.0 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.2 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.3 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:00:02.4 PCI bridge: IBM EADS-X PCI-X to PCI-X Bridge (rev 03)
0002:cc:01.0 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.1 USB controller: NEC Corporation USB (rev 43)
0002:cc:01.2 USB controller: NEC Corporation USB 2.0 (rev 04)
0002:d0:01.0 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)
0002:d0:01.1 Ethernet controller: Intel Corporation 82546GB Gigabit
Ethernet Controller (rev 03)

Regards,
Andreas
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
--
To unsubscribe, e-mail: opensuse-ppc+***@opensuse.org
To contact the owner, e-mail: opensuse-ppc+***@opensuse.org
Loading...